Tell us about your vision, and we’ll create a seamless solution for your home.

Friday, October 23, 2026
A left and right speaker pair works because human ears sit side by side, one on the left side of the head and one on the right. The brain compares two things between those two ears: when a sound arrives at each one, and how loud it is at each one. From that small difference, the brain builds a voice that seems to float in the middle, between the two speakers. Audio engineers call this a phantom image. No speaker actually sits there. The brain invents the voice in that spot.
Stack the two speakers instead, one above the screen and one below it, and that comparison has nothing to measure. Both speakers are the same distance from the left ear and the same distance from the right ear. Left and right receive the sound at the same time and the same volume from both speakers. There is no side to side difference for the brain to use. The voice has nowhere to lock in, so it spreads out and stays vague.
The bigger the screen, the worse this gets. A larger video wall pushes the top and bottom speakers farther apart, and the smeared sound grows with it.
A vertical center pair can put the voice back in the middle of the screen, where no speaker sits. It takes three things working together, and most installers only get one of the three right.
The speakers themselves. Each speaker has a waveguide, the shaped opening at the front of the cabinet that controls how high frequency sound spreads into the room. The waveguide decides how narrow or wide that sound beam is and where it points. Pick the wrong speaker for the room, and no amount of adjustment afterward will fix it.
The room. Where the speakers sit against the walls, ceiling, and floor around them changes where the ear thinks the voice is coming from. A hard surface near one speaker and a soft one near the other throws off the balance. The room and the speakers work as one system, not two separate parts. This is where years of acoustic design work pay off: reading a room correctly before anything gets mounted.
The audio processing. Digital signal processing, or DSP, is software built into the system that fine tunes what each speaker plays. The top speaker gets delayed by a few thousandths of a second against the bottom one. Certain frequencies get shifted in timing, called a phase adjustment. The tone of each speaker gets shaped to match the other. None of this is guesswork. It takes a calibration system with real measurement hardware, not a laptop and a tape measure.
David Hutter, owner of Hutter Home Theater, holds THX certification in audio calibration, video calibration, and home theater design, along with Imaging Science Foundation (ISF) video calibration certification and Home Acoustics Alliance (HAA) Level 2 audio calibration certification. He has gone through HAA training three times, most recently in 2021, to learn the measurement software that runs his current calibration system. That is the background it takes to make a vertical center pair sound like one voice instead of two speakers arguing with each other.
Some rooms do not have wall space above the video wall for a speaker. Floor to ceiling windows, art, or a low ceiling can rule that spot out. In that case, the upper speaker moves into the ceiling instead. The same three pieces still apply: the right speaker for that location, a room designed around it, and DSP to time align the ceiling speaker with the one below the screen. The voice still lands in the middle of the picture.
A vertical pair needs real speakers, real room treatment, and real budget. That makes the most sense on a large video wall, where the screen is wide enough that the top and bottom speakers would otherwise sit far apart. On a smaller television, a single well placed center channel speaker often solves the problem without the added cost and complexity of a matched pair and DSP tuning.
Every home theater and media room Hutter Home Theater designs starts with the screen size, the room shape, and the budget, then works backward to the right center channel approach for that specific space. There is no single answer that fits every room in the Seattle-Tacoma area, and a solution built for a client's living room in Bellevue may not be the right call for a media room in Gig Harbor.
Take just 3 quick questions and tell Hutter Home Theater about your room, your screen size, and the sound you are picturing. From there you will get a design built around how human hearing actually works, calibrated on site, and tuned to that specific room.
Learn more about custom home theater design, network design for systems that depend on a stable connection, and whole home automation that ties it all together.

Founder, Hutter Home Theater
Most of my work comes through referrals, and this blog is a way to share my knowledge with more families in the Seattle–Tacoma area. If you’re ready for a theater, smart lighting, or whole-home automation, I’d love to help you get started.
From custom theaters to smart home automation, I’ll help design a system tailored to your lifestyle. Let’s talk about your vision and bring it to life.
Subscribe to get the latest articles, updates, and tips delivered straight to your inbox.
We’ll only send relevant updates. Unsubscribe anytime.


© 2026 Hutter Home Theater. All Rights Reserved.